Home › Aluminum and Steel Fence Installation
We install aluminum and steel fences in Jacksonville, FL that add security and style with low maintenance. Ornamental metal fencing is ideal for pools, front yards, and property lines where visibility matters. Our team ensures accurate panel alignment, secure anchoring, and code compliant heights.
Truepost Fences Jacksonville provides professional aluminum fence throughout Jacksonville, FL, Florida and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (904) 867-3538 or request your free quote.
Durable aluminum and steel fences tailored to Jacksonville properties
If you live in Jacksonville, you know how hard the mix of sun, salt air, and summer storms can be on a fence. Truepost Fences Jacksonville focuses on aluminum fence and steel fence installations that are built specifically for North Florida conditions, so you get a fence that looks sharp and holds up to everyday use.
Aluminum fences are popular around pools, backyards, and front yards where you want an open view and low maintenance. They will not rust like raw steel, and the powder coated finish resists fading, chipping, and peeling in our heat and humidity. Steel fences are the better fit where security and impact resistance matter more, such as protecting vehicles, commercial equipment, or a side yard that backs up to a busy street.
Instead of pushing one material for every property, we walk your yard, look at slopes, sprinkler lines, and drainage patterns, and then talk through how you actually use the space. Around a pool or retention pond, aluminum often makes sense because it is code friendly and corrosion resistant. Along a driveway or an alley, heavier welded steel panels may be worth the upgrade to handle bumps and higher traffic.
Every project starts with clear measurements and a conversation about problem spots. In Jacksonville, that often includes sandy soil that can shift, older buried fence posts from a previous owner, or property lines that do not match where the old fence sits. We flag these early so there are no surprises once work starts and we can design a fence layout that works with your yard instead of fighting it.
How our aluminum and steel fence installation process works
At Truepost Fences Jacksonville, aluminum fence and steel fence installations follow a detailed field process that keeps your project organized and predictable. After a site visit and a written proposal, we schedule utility locating so no one hits electrical, gas, or communication lines when we dig. We also verify measurements against your survey, especially important in Jacksonville neighborhoods where lots can be irregular.
On installation day, our crew lays out the fence line with string and stakes, then marks each post location to match panel dimensions and gate openings. For aluminum fences, we typically use pre-fabricated rackable panels that allow us to follow gentle slopes without leaving big gaps. For steel systems, we often use heavier line posts and corner posts with welded or bracketed connections so the fence can handle more force.
We dig post holes to a depth that accounts for local frost-free conditions but also Jacksonville’s sandy soils. Holes are typically 24 to 36 inches deep depending on fence height, then we bell out the bottom where needed so the concrete has a wider base. We set each post in a concrete mix designed for structural use, check it with a level in two directions, and brace it until the concrete sets.
Once the posts are cured enough to support weight, we attach aluminum or steel panels using manufacturer specific brackets or screws, adjusting to maintain a level top line while following the grade. Gates are hung last so we can fine tune the swing, latch height, and clearances over driveways or paver walkways. Before we leave, we walk the line with you, open and close each gate several times, and review care instructions so you know how to get the longest life out of your new fence.
Aluminum and steel options that fit Jacksonville homes, pools, and businesses
Aluminum fences come in several grades and styles, and picking the right one matters more than most people realize. For a Jacksonville backyard or pool, we usually recommend residential or light commercial grade aluminum with 5/8 inch or 3/4 inch pickets and 2 or 2.5 inch posts. For commercial sites or heavy traffic areas, we may step up to thicker wall material and larger posts to resist bending.
You can choose from flat top, spear top, or a combination style. Around pools, many customers choose a flat top rail to avoid sharp points, while front yards sometimes use pressed spear pickets for a more traditional look that still meets safety standards. We talk through options for 3 rail versus 2 rail construction, extra bottom rails for small pets, and decorative accents like finials or rings.
Steel fences in Jacksonville are often used for high security areas or where impact resistance is critical. These may be made from ornamental steel panels with welded pickets or from heavier tube steel. We commonly upgrade the post size at drive gates and corners where forces concentrate. All steel products we install are either galvanized with a powder coat finish or otherwise treated to slow rust, which is important in a coastal climate.
Color choices are usually black, bronze, or white. Black is the most common and tends to disappear visually when you look across a lawn or toward the marsh. Bronze can complement certain brick or stucco homes, especially in older Jacksonville neighborhoods. We bring physical samples so you can see the finish in natural light and compare it to your trim, roof, and existing railings.
Permits, codes, and HOA rules in Jacksonville for metal fences
Jacksonville and surrounding areas have specific requirements for aluminum and steel fences, particularly around pools and on corner lots. Truepost Fences Jacksonville helps you navigate these requirements so you do not run into issues after installation.
For pool fences, the City of Jacksonville follows the Florida Building Code, which includes rules on minimum fence height, maximum gap at the bottom, picket spacing, and gate hardware. For example, most pool fences must be at least 4 feet tall, self closing and self latching, with latches mounted at a specific height or shielded so small children cannot easily reach them. We design aluminum fence and gate packages that are labeled as pool compliant, then install them to match the code details, not just the general idea.
Many neighborhoods in Jacksonville and nearby communities like Orange Park, Fleming Island, and St Johns have HOAs that regulate fence style, height, and color. Some only allow aluminum fences in certain profiles, while others restrict fences in front yards or along lakes and retention ponds. We frequently work from HOA guideline documents and help customers prepare simple drawings or product sheets for approval so you are not guessing what will be accepted.
Depending on height and location, the city or county may require a fence permit, especially for new pool barriers or taller steel security fences. We can either guide you through applying for a permit yourself or handle the paperwork as part of the project. Addressing setbacks, utility easements, and property lines in advance avoids having to move a finished fence because it was placed a few inches into a neighbor’s lot.
What affects the cost of an aluminum or steel fence in Jacksonville
Fence pricing in Jacksonville is driven by more than just the advertised price per foot. At Truepost Fences Jacksonville, we explain the main factors so you understand how your choices affect cost before you commit.
Material choice is one of the biggest drivers. Aluminum fence is usually more affordable than ornamental steel for the same style and height, especially in residential grades. Heavier steel, custom welded sections, and security features like extended pickets or thicker posts increase cost but may be justified if you need serious protection.
Layout and terrain also matter. A simple rectangular backyard with easy access for materials is less expensive per foot than a yard with multiple elevation changes, curves, or many short fence runs broken up by trees and structures. Each extra corner, cut panel, or stepped section adds labor and hardware. In older Jacksonville neighborhoods, we often find tree roots, old concrete, or remnants of previous fences that require extra time to remove or work around.
Gates are another key factor. A basic 4 foot wide walk gate is standard in most estimates, but extra walk gates, wide double drive gates, or custom arched tops increase both material and labor costs. If you want automatic openers on steel driveway gates, we plan for posts, power, and hardware rated for that weight. Finally, site prep like clearing overgrown shrubs, removing old chain link, or hauling away existing wood fences adds to the project total, although doing some of that yourself can help reduce the cost.
We provide written estimates that list materials, linear footage, gate count, and any special conditions we see, so you can compare options, such as aluminum versus steel, at different price points with no surprises later.
Why Jacksonville homeowners and businesses choose Truepost Fences Jacksonville
Choosing the right contractor is as important as choosing between aluminum and steel. Truepost Fences Jacksonville focuses on metal fence installations every week in this market, so we know how aluminum and steel perform in local soils and weather, and which products hold up best over time.
Our crews are trained to install aluminum fence and steel fence systems to manufacturer specifications, not just what happens to be common practice in the area. That means correct concrete depth, spacing that avoids panel rattle, and gate posts sized for the weight they carry. We photograph critical steps and keep notes on where underground features or irrigation lines are located so you have a record for future work.
Communication is another focus. We set realistic timelines, explain what will happen each day of the project, and stay reachable while the work is underway. If we uncover unexpected issues, such as a property line that does not match the old fence location, we pause and review options with you instead of pushing ahead and hoping it works out.
After installation, we walk the fence line with you, answer questions about maintenance, and explain what to expect from your aluminum or steel finish over the coming years. If an issue comes up, such as a gate that needs adjustment after the ground settles or a latch that feels too tight, you know who to call. Our goal is for your new metal fence to feel like a solid, long term improvement, not just a quick project to check off a list.
